Vintage Land Rovers for overland adventure

001 - Backcountry

1992 Defender 110 Hardtop - 200tdi

Full body-off restoration with uprated 200tdi and extensive off-road upgrades.  Left-hand drive conversion.

002 - Jörg's Car

1991 Defender 110 Hardtop - 200tdi

French registration, left-hand drive vehicle.  Mechanical work underway; will rebuild to buyer specification.

 

001- Backcountry

Available now:  $85,000 USD

We are proud to announce that our first body-off restoration is completed.  This “Backcountry” spec' is a no-holds-barred Defender for overland adventure.  If you're planning a journey to Patagonia or looking for an (extreme) surf wagon for your next beach trip, this Defender is more than capable.

Donor Vehicle:  1992 Defender 110 Hardtop 200 Tdi

Overview:  Complete body-off restoration with left-hand drive conversion and extensive engine and off-road performance upgrades.

Engine:  The 200 Tdi is widely recognized as one of Land Rover's most successful engine designs. Known for reliability, it remains a very popular engine among Defender enthusiasts.  To further improve performance and reliability, we rebuilt and upgraded the engine including an uprated intercooler and radiator from Allisport.  We have also added a variable turbo to improve responsiveness.   The result is at least 30% increase in torque and horsepower for cruising and off-road performance.

Engine work detail:

  • New pistons, main bearings, camshaft bearings, belts, pulleys, timing belt, power steering pump, water pump, and fuel pump
  • Allisport up-rated turbo, inter-cooler, and radiator
  • Silicone turbo hoses
  • Silicone coolant hoses
  • Allisport aluminum expansion tank.  Original plastic tanks have a habit of splitting because of the pressure from the cooling system. The Allisport upgrade is much stronger and more reliable.

  • Allisport aluminum engine breather

  • Allisport aluminum power steering reservoir. Original power steering reservoir often cracks after a number of years due to the vibration; this version is again much stronger and more reliable.

  • Re-timed and fully-tested injection pump
  • New stainless exhaust
  • >30% increase in HP / torque over stock

Drivetrain:  

  • New Ashcroft Engineering R380 gear box. The R380 was introduced with the later 300 Tdi and Td5 models of the Defender and is much stronger and more reliable than the original LT77 gearbox.  Ours also has a higher 5th gear to improve highway cruising. Ashcroft are known throughout the Defender world as being the best in the business for anything transmission or axle related.

  • New clutch, transfer case and universal joints 

Chassis:  Recently replaced (<2 years old); galvanized and painted

Exterior / Bodywork:

  • All body parts stripped and repainted
  • New bulkhead
  • LED headlights, indicators and brake lights

  • Masai blind-spot windows
  • Heated front windscreen

  • Heated rear windscreen

  • Rear washer wiper system

  • Stainless steel door hinge bolts.  The Defender’s body is made of aluminum and impervious to rust -- the original bolts are not.  Replacing the original steel bolts for stainless improves longevity.
  • Stainless steel wingtop grills

  • Stainless steel bottom grill for extended nose cone

  • Paint color - Sahara Dust with black powder coat accents

Interior / Comfort:

  • New, updated dashboard. We updated the original with a new dash setup and center console developed for the 2005 model Td5.  We feel this maintains an original look but improves functionality and ergonomics.

  • New, updated gauges. We have also upgraded the gauges to the later digital gauges from the Td5.

  • New Sparco R100 rally-style seats. Improved off road comfort without compromising on road comfort.

  • Lassalle headliner with insulation to cut down on heat through the roof as well as wind noise.

  • New sound proofing on bulkhead, floors and doors

  • Exmoor Trim molded matting system. Exmoor trim are world renowned for their interior products for the Defender. This matting system cuts down on noise and heat from the engine and provides a finished look to the interior.

  • Bulkhead reduction. We have shortened the bulkhead behind the front seats to allow the seats to recline fully. Adds leg room and comfort to the cabin.

  • Cubby box between passenger and driver

  • Heavy rubber matting in rear tub. Reduces road noise and protects the load bay.

Updated wiring system. Replaces the original, fault-prone wiring system with an updated wiring loom; improves reliability as well as integrating the dashboard and gauge upgrades.

Suspension and off-road performance upgrades:

  • Terrafirma heavy duty springs and shock absorbers allow the Defender to be loaded to full capacity and still maintain off road ability.

  • Terrafirma front and rear differential guards

  • Terrafirma steering arm protection skid plate

  • ARB bullbar, winch ready and will fit to customer spec'

  • Raised air intake

  • Extra fuel tank.  Boosts range to 600 miles.

  • Mantec chassis mounted spare wheel carrier.  A proven chassis mounted design that will withstand the harshest roads and allows easy access to your spare.

  • Hood mounted spare wheel carrier.  A trademark Defender look and essential for those trips when one spare just won’t cut it.

  • Front and rear way bars.  Essential for on-road stability with a heavily-laden vehicle.

  • Safety Devices full external roll cage.  No compromise on interior space. The roll cage bolts to 6 points on the chassis and is one of the strongest designs.

  • Side storage lockers. Originally designed for the military, these lockers are made to fit two jerry cans of fuel. We like using them to store tools but they provide easily accessible storage space for anything.

  • Front Runner gullwing side hatches. Easy access to the load bay. There’s nothing worse than stopping for lunch only to find that your cool box has been packed too far forward and you’ll have to unload to get to it. With these windows you can easily reach in and grab what you need.

  • Aluminum checker protection plates.  Added protection to body panels and door sills.

  • Polyurethane suspension bushings.  We like polyurethane bushings because you don't need a 20 ton press to remove them for field repairs.

Wheels & Tires:  

  • Heavy duty Land Rover wheels (five) painted to match bodywork
  • Tires - as shown or replaced per buyer specification

 

Rebuild pics

002 - Jörg's Car

$49,500 including service items below; contact us with offers or to discuss a more extensive rebuild

Donor Vehicle:  1991 Defender 110 Hardtop -- 200 TDI (French origin - left-hand drive vehicle)

Overview:  This well-traveled Defender comes to Rerover by way of our friend Jörg, a veteran overlander from Germany.  Jörg brought the vehicle to the US for several months of touring and has asked us to rebuild and find a new home for this Defender.  

We're currently doing the basics -- engine rebuild and other necessary mechanical items.  The chassis is less than 2 years old and free of rust.  

We will sell this car in good mechanical shape or rebuild as desired for a buyer.  

Service items to be completed by Rerover, included in the price above:

  • US (Missouri) vehicle title and registration
  • Complete engine service
  • Service front and rear brakes, master cylinder and lines
  • Inspect and replace wiring as necessary
  • New front and rear axle seals
  • New clutch
  • New front and rear transmission output seals
  • New alloy wheels (not on car but pictured above)
  • Detail interior and replace any broken parts

Pre-rebuild (as-is) vehicle pics